SMX-QS04-B

Best suitable for connectors/ferrules: ST, FC, SC, MU, LC, E2000, MS termini
extras/tinyslideshow/photos/01.jpg
SMX-QM50

Best suitable for connectors/ferrules: MT, MTP/MPO, MT-RJ, SMA 905
extras/tinyslideshow/photos/02.jpg
SMX-QD10

Best suitable for connectors/ferrules: ST, FC, SC, MU, LC, E2000, MT-RJ, SMA 905, MS termini
extras/tinyslideshow/photos/03.jpg
SMX-7QS

Best suitable for connectors/ferrules: ST, FC, SC, MU, LC, E2000, MT-RJ, SMA 905, MS termini
extras/tinyslideshow/photos/04.jpg
SMX-8QM-B

Best suitable for connectors/ferrules: MT, MTP/MPO, MT-RJ, SMA 905, MS termini, ST, FC, SC, MU, LC, E2000
extras/tinyslideshow/photos/05.jpg
SMX-8QM

Best suitable for connectors/ferrules: MT, MTP/MPO, MT-RJ, SMA 905
extras/tinyslideshow/photos/06.jpg

Features and Benefits
Comparison Chart
Software Package
Accessories

Features

Measure and report
per industry standards

Monitor and control
production quality

Explore surface details

You can download Interferometers brochure
in PDF file

High resolution optics

Resolve surface details as small as 0.4 um on single fiber and 1.4 um on multi-fiber connectors.

Largest field of view up to 5700 um

Measure connector from guide hole to guide hole.

50um scan range

Measure large height differences.

High contrast optics

Inspect buffer zone.

Wide range of fixtures

Inspect single, multi-fiber connectors, ferrules, bare fibers, MS termini,
both PC and APC.

Robust design

Make lab quality measurements in the field.

Fast scan modes

Measure single fiber in 1 second and multi-fiber connector in less than 8 seconds.

High resolution 2D and 3D surface profiles

Explore surface details.

Automated inspection software

Measure radius of curvature, apex offset, fiber height, core dip, etc.

Configurable report generation and data archival

Document your results your way.

Compliance to industry standards

Test per IEC, TIA, Telcordia or your own Pass/Fail criteria.

Interferometers Comparison Chart

Models:	SMX-QS04-B	SMX-QD10	SMX-7QS	SMX-8QM-B	SMX-8QM	SMX-QM50
Optimal for connectors:	Single fiber			Both	Multi-fiber
Recommended for applications:	Research and development		Production			Research and development
Field of View:	d=0.4 mm	d=1.4 mm	d=0.85 mm	3.5×1.8 mm	5.2 × 3.8 mm	5.2×3.8 mm
Lateral Resolution:	0.55 µm	1 µm	1.1 µm	1.4 µm	2.2 µm	1.75 µm
	High lateral resolution within required field of view provides for visualization of minute defects and for improved accuracy of measurements.
Optical magnification:	12.1×	5.5×	5×	1.6×	1×	2×
Focus:	auto	auto	auto (short range) and manual	auto (short range) and manual	auto (short range) and manual	auto
Suited for connectors*
ST, FC, SC (PC and APC)
MU, LC (PC and APC)
E2000 (PC and APC)
MIL-ST (M83522/16, MIL-C-83522)
M29504/14 (MIL-PRF-29504/14)
SMA 905
MT (PC and APC)
MT-RJ (PC and APC)
Measurement time **	10 sec (PC)	2,5 sec (PC)	4 sec (PC)	10 sec (MT12) 3 sec (PC)	6 sec (MT12)	6 sec (MT12)
Measurement mode:	monochrome	monochrome and white light	monochrome and white light	monochrome and white light	white light	white light
Maximal image size:	2590 × 1940	3000 × 2200	2590 × 1940	2590 × 1940	2590 × 1940	3000 × 2200
Power supply:	external; built-in battery	external	external (two USB2.0 cables)	external (two USB2.0 cables)	external (two USB2.0 cables)	external; built-in battery
Weight:	3.7 kg (8.16 lbs)	4.9 kg (10.8 lbs)	2.2 kg ( 4.8 lbs)	2.3 kg (5.1 lbs)	2.3 kg (5.1 lbs)	3.7 kg (8.16 lbs)
Dimensions (H×W×L):	110 × 145 × 240 mm (4.33 × 5.7 × 9.45 inches)	105 × 145 × 215 mm (4.13 × 5.7 × 8.46 inches)	93 × 130 × 150 mm (3.66 × 5.12 × 5.90 inches)	92 × 128 × 170 mm (3.62 × 5.04 × 6.69 inches)	92 × 128 × 170 mm (3.62 × 5.04 × 6.69 inches)	110 × 145 × 240 mm 4.33 × 5.7 × 9.45 inches)

* - yes (recommended) - yes (acceptable) not acceptable - no

** High Speed mode, Autofocus time not included

You can download Interferometers brochure in PDF file

Sumix interferometers are supplied with the ISI (Interferometric Surface Inspection) analytical software.

Functionality

Long range autofocus
High quality live view images
2D and 3D surface profiles
Rich set of controls (zoom, rotation, etc) for surface profiles understanding
Fast and automated measurements
Widest range of measured parameters
Compliance with industry standards
DB results storage
Raw data storage
Measurement report in MS Excel

Flexibility

User-defined Pass/Fail criteria
Configurable list of measured parameters
Inspection of non-standard (military or special) connectors
Compatibility with all Sumix interferometers

ISI screenshots gallery (static images)

Interferometeric Surface Inspection (ISI) is a general purpose analytical software using various algorithms such as phase shift narrow band or white light methods. ISI provides 3D surface reconstruction of fiber optic connector end face and measures various parameters such as radius of curvature of polish, fiber heights, polish off set, etc. In addition ISI stores test results in database and organizes them with identifiers that represent several configurable variables, such as job name, operator, customer, description, etc.

Reports are generated for a test group (job) or for single test, including all or partial measurement results. 3D scratch detection is provided according to various zones and user defined criteria. The ISI software is flexible as scan parameters and view layouts are provided by configuration files.
Measurements of single fiber connectors display and characterize the polished connector end-face providing surface information, such as ferrule radius of curvature, apex offset of polish, apex offset angle, fiber protrusion/under-cut, etc. 3D scratch detection is provided according to various zones and user defined criteria.

Measurements of multifiber connectors display and characterize the polished connector end-face providing surface information, such as angle of the polish, fiber protrusion, planar height differential, flatness deviation, etc.

Accessories

LC/PC Duplex connector fixture
for measurements of the LC Duplex connectors with PC end face.
Used with SMX-QD10, SMX-7QS, SMX-8QM*, SMX-8QM-B

FC/APC connector fixture
for measurements of the FC connectors with APC end face.
Used with SMX-QS04-B, SMX-QM50*, SMX-QD10, SMX-7QS, SMX-8QM*, SMX-8QM-B

3.2/SMA connector fixture
for measurements of the SMA 905 and SMA 906 connectors.
Used with SMX-QM50, SMX-QD10, SMX-7QS*, SMX-8QM, SMX-8QM-B

1.6/PC connector fixture
for measurements of the 1.6 mm connectors with PC end face.
Used with SMX-QM50, SMX-QD10, SMX-7QS*, SMX-8QM, SMX-8QM-B

SC/APC connector fixture
for measurements of the SC connectors with APC end face.
Used with SMX-QS04-B, SMX-QM50*, SMX-QD10, SMX-7QS, SMX-8QM*, SMX-8QM-B

MU/APC connector fixture
for measurements of the MU connectors with APC end face.
Used with SMX-QS04-B, SMX-QM50*, SMX-QD10, SMX-7QS, SMX-8QM*, SMX-8QM-B

LC/APC connector fixture
for measurements of the LC connectors with APC end face.
Used with SMX-QS04-B, SMX-QM50*, SMX-QD10, SMX-7QS, SMX-8QM*, SMX-8QM-B

2.5/PC connector fixture
for measurements of the SC, FC and ST connectors with PC end face.
Used with SMX-QS04-B, SMX-QM50*, SMX-QD10, SMX-7QS, SMX-8QM*, SMX-8QM-B

1.25/PC connector fixture
for measurements of the LC and MU connectors with PC end face.
Used with SMX-QS04-B, SMX-QM50*, SMX-QD10, SMX-7QS, SMX-8QM*, SMX-8QM-B

MTP/MPO PC connector fixture
for measurements of the MTP/MPO connectors with PC end face.
Used with SMX-QM50, SMX-8QM, SMX-8QM-B

MTP/MPO APC connector fixture
for measurements of the MTP/MPO connectors with APC end face.
Used with SMX-QM50, SMX-8QM, SMX-8QM-B

MT/PC ferrule fixture
for measurements of the ferrules with PC end face.
Used with SMX-QM50, SMX-8QM, SMX-8QM-B

MT/APC ferrule fixture
for measurements of the MT ferrules with APC end face.
Used with SMX-QM50, SMX-8QM, SMX-8QM-B

MTRJ/PC ferrule fixture
for measurements of the MTRJ ferrules with PC end face.
Used with SMX-QM50, SMX-QD10, SMX-7QS*, SMX-8QM, SMX-8QM-B

MTRJ/APC ferrule fixture
for measurements of the MTRJ ferrules with APC end face.
Used with SMX-QM50, SMX-QD10, SMX-8QM, SMX-7QS, SMX-8QM-B

E2000/PC connector fixture
for measurements of the E2000 connectors with PC end face.
Used with SMX-QS04-B, SMX-QM50*, SMX-QD10, SMX-7QS, SMX-8QM*, SMX-8QM-B

E2000/APC connector fixture
for measurements of the E2000 connectors with APC end face.
Used with SMX-QS04-B, SMX-QM50*, SMX-QD10, SMX-7QS, SMX-8QM*, SMX-8QM-B

2.0/PC connector fixture
for measurements of the 2.0 mm connectors with PC end face.
Used with SMX-QS04-B, SMX-QM50*, SMX-QD10, SMX-7QS, SMX-8QM*, SMX-8QM-B

* using fractional field of view

SMX-QS04-B

SMX-QM50

SMX-QD10

SMX-7QS

SMX-8QM-B

SMX-8QM